Common problems in washing with dishwasher

There are four main and common problems that we explain these problems
and their causes. Each problem could stem from one or more reasons that it is
required exact checking and consulting with repairman/technician, if necessary.
Full non-resolution tablets :
- Tablet place door is not open
- Washing time duration is short
- Pump inside machine does not work well
- Sprinklers inside dishwasher do not distribute water well ( with required amount and pressure )
Lack of clarity of dishes after washing :
- Water temperature is inappropriate
- Washing time duration is short
- Particular salt chamber is empty or has not filled with required amount
- Particular chamber of shining liquid is empty or required amount of shining liquid has not been used
- Sprinklers inside dishwasher do not distribute water well ( with required amount and pressure )
- Pump inside machine does not work well
- Amount of used detergent material is not sufficient
- Quality of detergent material is inappropriate
- Dishes arrangement is not proper in particular basket
- Filters are blocked
- Door of particular salt chamber is open
Scurf dishes after washing :
- Particular chamber of shining liquid is empty or required amount of shining liquid has not been used
- Door of particular salt chamber has not been closed properly
- Particular salt chamber is empty or has not filled with required amount
- Abstergent material without phosphate has been used
- Water storage reservoir or water storage pipe has been rusted or oxidized
- Water hardness is more than normal amount ( over 400 mg/l )
Not to dry out dishes after washing :
- Particular chamber of shining liquid is empty or required amount of shining liquid has not used
- Dishes arrangement is not proper in particular basket
- Dishes have taken out from machine very soon
- Washing program has not been chosen appropriately
- Machine element is faulty or does not work
Water hardness issue :
There is always some calcium bicarbonate in natural water as soluble that is named as water hardness, this hardness is separated from water with warming water with the loss of Co2 and sediments as opaque layer on dishes so that color of dishes becomes turbid. Water hardness may also create permanent scratch and opacity over time, so, to prevent this, it is anticipated a system named softener in dishwashers. Softener contains zeolite material and water loses its hardness to zeolite before entering in washing cycle. When zeolite is saturated from hardness, activator salt takes hardness from zeolite and zeolite performs softener function accordingly. Although Natar tablet has very advanced formulation and various properties and can perform washing operation without using shining liquid and activator salt well, it is recommended that Natar shining liquid and Natar salt are also used along with tablet for better results.
Dishes arrangement in dishwasher :
It is very important how to arrange dishes in dishwasher as follows :
Dishes that are rather flat like plate, platter and … must be arranged vertically and slightly inclined ( it is anticipated special places inside basket for convenience )
Dishes such as bowl, cup and mug must be arranged upside-down, otherwise it is inevitable to remain water inside these dishes
Spoon, fork and knife must be put in special place vertically
Skimmer and ladle must be put horizontally so that their bezel lies downwards
GET IN TOUCH WITH US TODAY
2nd Floor, No. 4, 5th St., Shahid Sarafraz St., Shahid Beheshti Ave., Tehran-Iran
Tel: +98-21 88749318, 88734610
Fax: +98-21 88736088
E-mail: info@natarco.ir
Instagram: instagram.com/natar.yach